"); myWindow.document.write(""); } -->
Underseal® Blindside™ Membrane is a 73 mil, pre-concrete pour, strong sheet membrane waterproofing with a thick, cross-laminated, high-density polyethylene (HDPE) backing, laminated to a thick layer of proprietary waterproofing adhesive compound integrated into a nonwoven geotextile fabric.
Underseal® Blindside™ Membrane is used as a waterproofing membrane where vertical, positive-side waterproofing is required, but access to the positive side is impossible due to the soil retention system. Once the concrete is poured against the Blindside™ membrane, the concrete cures and a mechanical bond forms to secure the concrete to the membrane. Also, subsequent to concrete placement, cold flow of the waterproofing compound will take place and an adhesive bond will be added to the mechanical bond given by the fibers. With both a mechanical and adhesive bond, the concrete will be tightly sealed and bonded to the membrane, creating superior protection against moisture intrusion. 73 mil Underseal® Blindside™can also be used in certain horizontal applications.
|606 Tape||High strength double-sided tape comprised of rubberized asphalt||more detail|
|650 LT Liquid Adhesive||Used to prime all structural concrete, masonry, insulation or wood surfaces prior to membrane installation.||more detail|
|California Sealant||Used to prime structural surfaces on which waterproofing membranes will be applied||more detail|
|Detail Sealant PW™||VOC./HAPS free high performance solvent-free sealant||more detail|
|LM-95||Two-component fast cure urethane waterproofing membrane||more detail|
|Poly Cover||Preformed dome shaped tie back cover made with heavy duty, high impact ABS plastic||more detail|
|Polyflow® 15 / 15P||Prefabricated geocomposite vertical use drainboard with a compressive strength of 15,000 psf||more detail|
|Totalflow™||High Volume Water Removal System||more detail|
|Underseal® Fabric Tape||Use around pipe penetrations and at end laps for patching damaged areas of the membrane||more detail|
|Underseal® Inside Corner Boot||To be applied in the inside corner to reinforce and seal the corners of the Underslab membrane||more detail|
|Underseal® Outside Corner Boot||For use on the outside corners to reinforce and seal the Underslab membrane||more detail|
|Underseal® Pit Top Corner Boot||Preformed corner boot used to reinforce and seal the Underslab Membrane||more detail|